The Lexium DBS8000+ is MPEG2 digital
satellite receiver. This cost-effective PVR ready digital satellite
receiver has features like component video output, blind scan, USB port, and
is DiSEqC1.2 & USALS compatible. The receiver is delivered
pre-programmed with all transponders and up to date channel list from Galaxy
19 (97║ West).
USB PVR Ready
Component video output
Software update via USB, PC, & STB
Channel list, TP list, satellite list, & DiSEqC setting update via USB
Multi-CAS / Card slot
Ch3/4 RF modulator
7-Button front panel
version 1.0/1.1/1.2/ USALS compatible
conversion from PAL to NTSC
"The MOST Technician-Friendly Satellite Receiver On The Market"
How much time do you waste to program & re-program receiver
after receiver for your customer time after time again? Now, with the
new Lexium Digital DBS8000+ satellite receiver, you don't have to waste time
every time you need to program a satellite receiver. This USB
satellite receiver allows you to program satellite list, transponder list,
channel list, LNB frequencies, transponder frequencies, & DiSEqC settings.
Once done, you can backup your setting as a sample file (BIN File) and
transfer it to a 2GB
thumb drive. Next time you are at a customers home, instead of
wasting 20mins-1hr programming the receiver, stick the
thumb drive in the USB port, and by only
pressing 3 buttons, you will be on your way to programming the receiver the
way you want in less than 1min. That's right, less than 1min.
Do you install for multiple ethnicities? Get a larger
thumb drive and save a file for every type of customer you have.
For example, if you service Farsi speaking customers, you may want to
program the receiver with the Farsi speaking stations lined up from 1-20 and
save it as a file in your thumb drive. If you service Vietnamese
speaking customers, you may want to save a file with Vietnamese channels
listed from 1-5, etc.... Then when you go to a customers home, simply
load the proper file on the receiver, and you are finished!
What is the easy download section?
From time to time we will upload the BIN files that will
give you the up to date satellite list, transponder
frequency list, and channel list from the most popular
satellites in North America. Just in case you erase
your channel list, or if you erase your TP, or if you just
want to get all the up to date data from the satellite, all
you do is download these files onto your thumb drive, stick
your thumb drive in the USB port of the receiver, and load
the new file on your Lexium DBS8000+. In less than a
minute your receiver will have the latest satellite data.
Download instructions below.