|
|
Are you a broadcaster
and need to get equipment to your viewers,
affiliates, engineers, or resellers? Contact
WS International for our broadcasters program.
WS International pioneered the broadcaster program
in the satellite industry. Contact us for full
detailed information and to see how we can help you
with your needs.
Contact Us
|
|
|
| |
|
Comes with a Universal
Remote Control
Download the
remote manual
Fortec Star MercuryII FTA Satellite Receiver
Component Output |
The Fortec Star MERCURY II satellite receiver
provides digital free-to-air satellite reception.
MERCURY II is a powerful satellite receiver ideal
for satellite enthusiast. This new model has component out. The receiver has an easy-to-use Menu, yet
is feature-rich. MERCURY II comes with a comprehensive Power Scan
for blind searching satellites. Users can back up their channel list
before upgrading the software, and then restore the channel list,
all from within the receiver’s own menu. The front panel has 8
buttons allowing complete control of the receiver’s functions
without the use of the remote. The back panel has all the connection
options you would need, with RCA composite jacks, component jacks (Y,Pb,Pr),
and an S-video connection. |
Features
-
Channel Back-up and Channel recovery
function
-
8-button Menu Control on the front panel
-
Component video (Y,Pb,Pr) and S-Video
connections
-
3 RCA connections (1 Video, 2 Audio L/R)
-
POWER Scan (blind search) with
complete parameter control
-
One-button quick start Power Scan on the
remote
-
One-button jump to Channel Edit function
-
Dolby Digital 5.1 audio pass-through
(optical)
-
100 programmable satellites and 6,000
programmable channels
-
Timer function for Sleep / Wake Up / VCR
Record and Channel Reminder
-
Fully MPEG 2 / DVB compliant, MCPC/SCPC,
C/KU reception
-
1 LNB input with IF loop through for 2nd
receiver
-
Manual PID scan function
-
DiSEqC 1.2 and
USALS supported
-
Picture-In-Graphics function
-
Multi-Picture (4,9, 13 or 16 pictures)
function
-
ZOOM In/Out
-
Electronic Program Guide
-
Multi language menu
-
8 favorite channel group selection and
parental lock
-
Close Caption Supported
-
Data transfer: receiver-to-receiver or
PC-to-receiver
|
IF / Tuner
|
|
Input Frequency |
950 MHz to 2150 MHz |
|
Input Signal Level |
-30 to -65dBm |
|
Input Impedance |
75 ohm nominal |
|
Input Connector |
F-type, IEC 169-24,
Female |
|
FEC Decoder |
Convolution Code Rate
l/2, 2/3, 3/4,
5/6 and 7/8 with
Constraint Length K=7 |
|
Demodulation |
QPSK |
|
Symbol rate |
1-45 Ms/s SCPC/MCPC |
|
IF Frequency |
Zero IF |
|
LNB Power & Polarization |
V13 / H18, 500mA MAX.
overload protection |
|
DiSEqC Control |
DiSEqC. 1.0, 1.1 / DiSEqC
1.2 Compatible |
|
Positioner |
USALS compatible
|
Memory
|
|
Processor |
NEC 61114 |
|
Flash Memory |
2 Mbytes |
|
SDRAM |
16 Mbytes |
|
Satellite Capacity |
100 |
|
Channel Capacity |
6,000 |
Audio / Video Decoding
|
|
Video Decoder |
MPEG-2 MP@ML (ISO/IEC
13818-2) |
|
Input Rate |
60Mbit/s Max |
|
Video Resolution |
720 x 480(NTSC) |
|
Aspect Ratio |
4:3, 16:9 (Letter Box) |
|
Audio Decoder |
MPEG Layer I &II
|
|
Audio Mode |
Mono L/R, Dual Channel,
Joint Stereo, Stereo |
|
Audio Sampling Frequency |
32, 44.1, 48 KHz |
Audio / Video
Output
|
|
Video |
RCA composite, component
(Y,Pb,Pr), S-Video |
|
Audio R/L |
RCA/Cinch Volume & Mute
Control |
|
S/PDIF |
Digital Audio Output
DOLBY DIGITAL 5.1
Pass-through |
|
Serial Data Interface |
|
Connector Type |
9 Pin D-Sub (male) |
|
Signal |
RS-232C, Max. 115200Bps |
Power Supply
|
|
Supply Voltage
|
100VAC ~ 120VAC
60Hz(SMPS) |
|
Power Consumption |
Max. 30W |
General
|
|
Weight |
Approx. 2.52 Kg |
|
Dimensions |
300(W) x 210(D) x 60(H)mm |
|
|
