WS International Wholesale Distributor of Satellite Telecommunications Equipment | Free To Air / FTA, Receivers, Dish, Satellite Dish Antennas, DiSEqC Switches, DiSEC Motors, C & Ku Band LNB & LNBFs, and much much more.....

.

 

Atlanta Branch:

1-888-276-6436

Los Angeles Branch:

1-888-719-9211

International:

+1 770-420-5272

International:

+1 818-485-8350

All WS International Brand Equipment Carry A

 

 

Tour Our China Office & Factory

 

Satellite Receivers

- LEXIUM DBS7000

- LEXIUM DBS6600

- Omegasat DSB6000U

- Omegasat DSB-5701

- Omegasat DSB-5700

- 16GB USB Flash Drive

 

Remotes & Extenders

- Wireless Extender

- Omegasat DSB5700

- Omegasat DSB5701

- LEXIUM DBS7000
- LEXIUM DBS6600

 

Ku LNBF's

- ESX521FE Single LNBF

- Blue Blazer Ku LNBF

- ESX521UFE Single LNBF

- ESX521U-AM Monoblock

- ESX522FE Dual LNBF

- ESX522UFE Dual U. LNBF

- 521 Single LNBF

- 522 Dual LNBF

- 524U Quad LNBF

- ESX5421 Monoblock

- 741 CKU LNBF

- 741U CKU LNBF

- LKU1-2A Universal

- Chaparral Single LNB

- Stealth Bullet U1

- TRACKER U1

- Star Bracket

 

C Band

- ESX211 C Band LNB

- ESX244 C Band LNBF

- ESX242 C Band LNBF

- ESX241 C Band LNBF

- 241 C Band LNBF

- 242 C Band LNBF
- 741 CKU LNBF
- 741U CKU LNBF

- NS741 C/Ku LNBF

- NS741U C/Ku LNBF

- WSKU2C Conical Scalar

  

Satellite Dishes

- WS7630 - 75cm Ku

- DS2076 - 76cm Ku

- WS9036 - 90cm Ku

- WS1247 - 120cm 

- WS1247M - 1.2m

- WS1870P - 6ft

- WS1870 - 1.8mts

- WS24095 - 240cm

- WSKU2C Conical Scalar

- WS40MM-P Clamp


LNBF Holders & Brackets

- ADL3LNB

- SADL2LNB

- LBRK30U

- WS40MMP

- R4-DTV

- D5-DISH

- WSKU2C Kit

- STAR Bracket

 

Motors & Controllers

- VBox-X Positioner
- SG-9120 HH Motor
- SG-9120B HH Motor
- PMA24 36V Actuator
- SG-6000 HH Motor
otor

 

RS232 Cables

- RS232 Cables NM

- RS232 Cable Serial

 

Satellite Switches

- 22KHz Switch

- 4X1 DiSEqC Switch

- 4X1 DiSEqC With HD

- 2X1 DiSEqC Switch

- 3X4 Multi-Switch

- Diplexers

 

Satellite Installation

- FastAlign® 5100Pro

- FastAlign® 7100Pro

- DIY Install Kit

- Installation Tools

- SF95 Satellite Finder

- SF110+C Sat Finder

- DSF120+ Finder

- SF99 Finder Kit

-Sat Finder Battery Holder

-Installation Supplies

 

Satellite Meters & Finders

- FastAlign® 5100Pro

- FastAlign® 5110Pro

- FastAlign® 6100Mini

- FastAlign® 7100Pro

- SF95 Satellite Finder

- SF110+C Sat Finder

- DSF120+ Finder

- SF99 Finder Kit
-Sat Finder Battery Holder

 

 

Are you a broadcaster and need to get equipment to your viewers, affiliates, engineers, or resellers?  Contact WS International for our broadcasters program.  WS International pioneered the broadcaster program in the satellite industry.  Contact us for full detailed information and to see how we can help you with your needs.

Contact Us 

LEXIUM Fastalign® 7100Pro Professional Satellite Meter

Automatically displays the name of the satellite you are pointing to!

 

New AutoFind® Technology;

New Automatic Satellite Recognition Technology & QuickSweep® Technology used inside the all new

LEXIUM FastAlign® 7100Pro

Professional Satellite Meter

 

 


What if there was a professional satellite meter that would display the satellite name, and signal quality every time you would point to a satellite, without a single push of a button?  Well, now there is.  It's called AutoFind Technology® and it's exclusively built inside and available inside the LEXIUM FastAlign® 7100Pro satellite signal meter, along with the original QuickSweep Technology.

 

A professional meter with this type of technology should not cost you an arm and a leg.  You'll be pleasantly surprised at the super low cost of this new professional satellite meter!

 

Traditional professional satellite meters only give you a signal quality reading after you specify your targeted satellite that you are trying to point to.  The problem with this is that you don't know in which direction you need to move your dish in order to hit your targeted satellite because there is no indication of where on the Clark belt you are.  With the FastAlign® 7100Pro when you see which satellite you are getting a signal from, you will know if you need to move your dish to the left or right (east or west), up or down because it displays the name of the satellite you are currently on, making the satellite you are actually receiving signal from a point of reference.  This makes your job a lot easier and allows you to quickly install and get signal from your targeted satellite! For example: In North America, your targeted satellite is Galaxy 19 (@ 97W), and the meter displays SES 1 (@ 101W) as you are moving your satellite dish, you know you will have to move left (east) and down just a little until you find Galaxy 19.  It's that simple.

 

HERE IS A QUICK GLANCE AT WHAT THIS INCREDIBLE NEW SATELLITE METER DOES

 

 

The LEXIUM FastAlign 7100Pro is featured in the Tele-Satellite magazine. 

 

What is QuickSweep Technology?

QuickSweep technology in the LEXIUM line of meters allows the user to quickly move a satellite dish without having to worry about passing the targeted satellite because there is no lag time from the time that you lock in signal on your dish to the time that it's displayed on the meter.  As soon as signal is received on the satellite dish, the meter will display the signal level and quality and will show "LOCKED" on the screen.  Now you can move your dish fast & worry free! 

 

WS International offer the lowest price on the original LEXIUM meter.  Genuine LEXIUM line of satellite receivers and satellite signal meters are exclusively available from WS International!  If you are not an authorized WS International reseller or installer yet, it's easy & FREE to sign up.  Click Here to register today!

The new AutoFind Technology®  is an automatic satellite recognition technology that recognizes & displays the name of the satellite you are pointing to from the programmed list of satellites in its databank.  In addition, the FastAlign® 7100Pro displays your signal quality so you can make sure you get the highest possible signal while by the satellite dish.  As you move your satellite dish across the Clark belt, every time your satellite dish receives signal from a programmed satellite, the meter displays it along with your quality bar reading. 

Key Features:

  • DiSEqC1.2 Compatible
  • DiSEqC1.1 Compatible
  • DiSEqC1.0 Compatible
  • Fully Programmable
  • USB Interface
  • AutoFind® Technology
  • QuickSweep® Technology
  • Displays TP Frequency
  • Backlight - Display Illumination - Day & Night Mode
  • Speed Management
  • On/Off Timer (Automatically turns off your meter after idle to save battery life)
  • Factory Default / Meter Reset Feature
  • TP Name Editable
  • Satellite Name Editable
  • Satellite Location Editable
  • Load Satellite Name / TP Specifications Via Computer or Manually Using Meter
  • 8 Transponders Programmable Per Satellite
  • 27 Satellites Programmable
  • Easy To Read Oversized Display
  • LNB LO Frequency Programmable
    • 10750MHz
    • 9750MHz
    • 10600MHz
    • 11300MHz
    • 9750/10600MHz
    • 5150MHz
    • 5750MHz

As you have read according to the above specifications, in addition to DiSEqC1.0 and DiSEqC1.1, the FastAlign® 7100 also features DiSEqC1.2, making it capable of moving any DiSEqC motor on the market including the most popular SG9120 & SG9120B motors.  In addition, the display of the meter displays large, easy to read characters and signal quality bar. 

You can easily update the satellite list and transponder specifications and data on the meter using the four buttons on the meter, or you can download the loader software (coming soon) for the meter and update the satellite list and transponder data using your own personal computer or laptop. 

Other features include a timer that turns off your meter within 10, 20, 30, 40, 50, 60, 70, 80, or 90 minutes of non use.  This features turns off your FastAlign® 7100 and saves your battery life if you forget to turn it off after use.  The back light illumination allows you to use the meter in the dark to align and install your satellite dish.  The meter is also compatible with a large selection of the most popular LNBFs on the market. 

The meter includes a home charger / wall charger, along with 8 rechargeable AA batteries, protective carrying case and neck strap.  If your meter ever runs out of batteries during your work day, you can easily purchase & replace with any AA battery from the store and continue to your next installation.  Additional rechargeable batteries (1.2V 2700mAh) are available for purchase through your local LEXIUM distributor, or you can use any other AA battery readily available from any local electronic store or center. 

Also available through WS International, in addition to the North American charger (110V/AC) supplied with the meter, is an optional European charger with 240V/AC input available for purchase.

WS International is the exclusive distributor for North America for this satellite meter. 

Why do some satellite names not displayed under "Auto Search" function?
When using the Auto Search function, also known as the AutoFind® function, the particular satellite must be enabled and turned on to be used with the AutoFind® function.  You can simply follow the instructions below to activate this function for any satellite you desire.  We have put together a video that will walk you through as well:

 

  1. Turn your meter on by pressing the "F4" key.

  2. Choose Day or Night mode by pressing the "F2" or "F3" button respectively.

  3. Keep Pressing the "F2" or "F3" buttons until you see "ADDITIONAL FUN.".

  4. Press "OK" by pressing the "F1" button & enter the additional function section of the meter.

  5. Keep Pressing the "F2" or "F3" buttons until you see "EDITOR".

  6. Press "OK" by pressing the "F1" button and enter the editing section of the meter.

  7. Choose the satellite you want to turn the AutoFind® function on for by pressing the "F2" or "F3" buttons.

  8. Press "OK" by pressing the "F1" button & enter the editing section for that particular satellite.

  9. Keep Pressing the "F2" or "F3" buttons until you see "AUTO SEARCH".

  10. Press the "F1" button.

  11. At this point, the word "OFF" will blink. 

  12. switch to "ON" by pressing the "F2" or "F3" button.  The screen will blink "ONF", then will display "ON"

  13. When done, and to save, press "F1" button.

  14. You will see a message that displays "TO KEEP ?".  Choose "YES" by pressing the "F1" button.

At this point, this satellite is now turned on to automatically display when you use the meter in AutoFind® mode.

 

Inquire About This Product

Contact Information

Item:

Your Name:

Telephone

Email:

Home | Products | Quote | Become a Reseller | RA# Request | 

Contact Us | Trouble Shoot | Terms & Conditions of Purchase & Warranty | Reseller Information | Custom Manufacturing Service | OEM

Lexium Professional Technology

    

WS International is a Wholesale Supplier and Distributer of DTH (Direct To Home) FTA, MPEGII, and DVB Equipment - WS International Blog

©Copyright 2010 WS International.  All materials contained on this site are protected by United States copyright law and may not be reproduced, distributed, transmitted, displayed, published or broadcast without the prior written permission of WS International, the owner of this content. You may not alter or remove any trademark, copyright or other notice from copies of the content.  Product maybe different from items pictures. 

www.galaxy-marketing.com www.dvb4all.com www.bluetoothdongles.com www.mylocalinstaller.com